CWE-78— OS Command Injection

Shihonkanri Plus GOOUT Ver1.5.8 and Ver2.2.10 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

WL-Enq 1.11 and 1.12 allows remote attackers to execute arbitrary OS commands with the administrative privilege via unspecified vectors.

Keijiban Tsumiki v1.15 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Logstorage version 8.0.0 and earlier, and ELC Analytics version 3.0.0 and earlier allow remote attackers to execute arbitrary OS commands via a specially crafted log file.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker on the adjacent network to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to execute arbitrary OS commands or cause a denial-of-service (DoS) condition by sending a specially crafted request to a specific URL.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can bypass command injection mitigations and execute commands as the root user by sending a cr…

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS A…

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via SSH. An authenticated remote attacker can execute commands as the root user by issuing a specially crafted "unset" command.

Grandstream HT800 series firmware version 1.0.17.5 and below is vulnerable to an OS command injection vulnerability. Unauthenticated remote attackers can execute arbitrary commands as root by crafting a special configuration file and sendi…

Improper neutralization of special elements used in an OS command in Nagios XI 5.7.3 allows a remote, authenticated admin user to execute operating system commands with the privileges of the apache user.

In BIG-IQ 6.0.0-7.0.0, a remote access vulnerability has been discovered that may allow a remote user to execute shell commands on affected systems using HTTP requests to the BIG-IQ user interface.

SAP Solution Manager and SAP Focused Run (update provided in WILY_INTRO_ENTERPRISE 9.7, 10.1, 10.5, 10.7), allows an attacker to modify a cookie in a way that OS commands can be executed and potentially gain control over the host running t…

The web-management application on Seagate Central NAS STCG2000300, STCG3000300, and STCG4000300 devices allows OS command injection via mv_backend_launch in cirrus/application/helpers/mv_backend_helper.php by leveraging the "start" state a…

Improper Input Validation in Eaton's Intelligent Power Manager (IPM) v 1.67 & prior on file name during configuration file import functionality allows attackers to perform command injection or code execution via specially crafted file name…

languageOptions.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows unauthenticated attackers to remotely execute code via the lang parameter.

contentHostProperties.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows authenticated attackers to remotely execute code via the name parameter.

Schmid ZI 620 V400 VPN 090 routers allow an attacker to execute OS commands as root via shell metacharacters to an entry on the SSH subcommand menu, as demonstrated by ping.

D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name.

A remote code execution issue was discovered in HashBrown CMS through 1.3.3. Server/Entity/Deployer/GitDeployer.js has a Service.AppService.exec call that mishandles the URL, repository, username, and password.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affect…

HP nagios plugin for iLO (nagios-plugins-hpilo v1.50 and earlier) has a php code injection vulnerability.

Cacti 1.2.8 allows Remote Code Execution (by privileged users) via shell metacharacters in the Performance Boost Debug Log field of poller_automation.php. OS commands are executed when a new poller cycle begins. The attacker must be authen…

Meinberg Lantime M300 and M1000 devices allow attackers (with privileges to configure a device) to execute arbitrary OS commands by editing the /config/netconf.cmd script (aka Extended Network Configuration). Note: According to the descrip…

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some …

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Fetch URL page and entering shell metacharacters in the URL field. (In some cases, authentication can be…

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authe…

smtp_mailaddr in smtp_session.c in OpenSMTPD 6.6, as used in OpenBSD 6.6 and other products, allows remote attackers to execute arbitrary commands as root via a crafted SMTP session, as demonstrated by shell metacharacters in a MAIL FROM f…

Rapid7 Metasploit Framework versions before 5.0.85 suffers from an instance of CWE-78: OS Command Injection, wherein the libnotify plugin accepts untrusted user-supplied data via a remote computer's hostname or service name. An attacker ca…

An OS Command Injection vulnerability in the endpoint_devicemap.php component of Fonality Trixbox Community Edition allows an attacker to execute commands on the underlying operating system as the "asterisk" user. Note that Trixbox Communi…

Cayin CMS suffers from an authenticated OS semi-blind command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user through the 'NTP_Server_IP' HTTP POST pa…

The EasyCorp ZenTao Pro application suffers from an OS command injection vulnerability in its '/pro/repo-create.html' component. After authenticating to the ZenTao dashboard, attackers may construct and send arbitrary OS commands via the P…

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in productio…

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of…

Codecov npm module before 3.6.2 allows remote attackers to execute arbitrary commands via the "gcov-args" argument.

codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an inc…

gulp-scss-lint through 1.0.0 allows execution of arbitrary commands. It is possible to inject arbitrary commands to the "exec" function located in "src/command.js" via the provided options.

node-prompt-here through 1.0.1 allows execution of arbitrary commands. The "runCommand()" is called by "getDevices()" function in file "linux/manager.js", which is required by the "index. process.env.NM_CLI" in the file "linux/manager.js".…

closure-compiler-stream through 0.1.15 allows execution of arbitrary commands. The argument "options" of the exports function in "index.js" can be controlled by users without any sanitization.

pulverizr through 0.7.0 allows execution of arbitrary commands. Within "lib/job.js", the variable "filename" can be controlled by the attacker. This function uses the variable "filename" to construct the argument of the exec call without a…

gulp-tape through 1.0.0 allows execution of arbitrary commands. It is possible to inject arbitrary commands as part of 'gulp-tape' options.

docker-compose-remote-api through 0.1.4 allows execution of arbitrary commands. Within 'index.js' of the package, the function 'exec(serviceName, cmd, fnStdout, fnStderr, fnExit)' uses the variable 'serviceName' which can be controlled by …

gulp-styledocco through 0.0.3 allows execution of arbitrary commands. The argument 'options' of the exports function in 'index.js' can be controlled by users without any sanitization.

clamscan through 1.2.0 is vulnerable to Command Injection. It is possible to inject arbitrary commands as part of the `_is_clamav_binary` function located within `Index.js`. It should be noted that this vulnerability requires a pre-requisi…

npm-programmatic through 0.0.12 is vulnerable to Command Injection.The packages and option properties are concatenated together without any validation and are used by the 'exec' function directly.

fsa through 0.5.1 is vulnerable to Command Injection. The first argument of 'execGitCommand()', located within 'lib/rep.js#63' can be controlled by users without any sanitization to inject arbitrary commands.